Hotwire 6210-A2, 6211-A2, and 6381-A2 User’s Guide Document Number 6210-A2-GB21-10 April 2004
Hotwire 6210, 6211, and 6381 User’s Guide 2.2 LED description (Front panel) z Power LED: On indicates that the power is supplied to the modem. z S
Hotwire 6210, 6211, and 6381 User’s Guide 3 Getting Started This chapter provides basic instructions for connecting the modem to a computer or a LAN
Hotwire 6210, 6211, and 6381 User’s Guide 3.1.1 Cable Connections Step 1. Connect the LINE Port Connect the supplied modular phone cable to the LINE
Hotwire 6210, 6211, and 6381 User’s Guide 3.2 Configuring Your PC Before you start to access the modem via Ethernet, you must configure your PC’s TCP
Hotwire 6210, 6211, and 6381 User’s Guide Figure 3.2. New Hardware Installation Options Figure 3.3. Browse for Folder C. The Wizard will ask you
Hotwire 6210, 6211, and 6381 User’s Guide Figure 3.5. Hardware Installation D. Click on Finish to close the Wizard at the completion page (Figure 3
Hotwire 6210, 6211, and 6381 User’s Guide 4. Ensure that the check box to the left of the item labeled Internet Protocol (TCP/IP) is checked, and cli
Hotwire 6210, 6211, and 6381 User’s Guide Figure 3.9. TCP/IP Properties in Windows XP 6. Click on twice to confirm your changes, and close the Con
Hotwire 6210, 6211, and 6381 User’s Guide 11. In the Internet Protocol (TCP/IP) Properties dialog box, click in the radio button labeled Use the foll
Hotwire 6210, 6211, and 6381 User’s Guide 5. Click on Microsoft in the Manufacturers list box, and then click TCP/IP in the Network Protocols list bo
Copyright © 2004 Paradyne Corporation. All rights reserved. Printed in U.S.A. Notice This publication is protected by federal copyright law. No part o
Hotwire 6210, 6211, and 6381 User’s Guide 3.2.7 Assigning IP to your PC automatically by DHCP To use the CPE’s DHCP feature (only available on Models
Hotwire 6210, 6211, and 6381 User’s Guide 4 Using the Web Interface This section will guide you through your modem’s configuration, and other uses o
Hotwire 6210, 6211, and 6381 User’s Guide 4.2 Home screen The first screen (Figure 4-2) that appears after the log in screen is the Home screen. Fro
Hotwire 6210, 6211, and 6381 User’s Guide 4.3 Setup To set up your modem with a basic configuration, from the Home page, select Setup. Figure 4-3 ill
Hotwire 6210, 6211, and 6381 User’s Guide 4.4 Configuring the WAN Before the modem will pass any data between the LAN interface and the WAN interface
Hotwire 6210, 6211, and 6381 User’s Guide 6. Select the quality of service (QOS). Leave the default value if you are unsure or the ISP did not provid
Hotwire 6210, 6211, and 6381 User’s Guide • On Demand – Enables on-demand mode. The connection will disconnect if no activity is detected after the s
Hotwire 6210, 6211, and 6381 User’s Guide 4. Select the encapsulation type (LLC or VC). If you are not sure which to use, just use the default mode.
Hotwire 6210, 6211, and 6381 User’s Guide 4.4.1.4 DHCP Connection Setup Dynamic Host Configuration Protocol (DHCP) allows the modem to automaticall
Hotwire 6210, 6211, and 6381 User’s Guide 4.4.1.5 Static Connection Setup A static connection is used whenever a known static IP is assigned. The acc
Hotwire 6210, 6211, and 6381 User’s Guide Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product
Hotwire 6210, 6211, and 6381 User’s Guide 4.4.2 Modify an Existing Connection To modify an existing connection: 1. From the Home screen, click on Se
Hotwire 6210, 6211, and 6381 User’s Guide Figure 4-10. DHCP Server Configuration In addition to the DHCP server feature, the modem supports the DHCP
Hotwire 6210, 6211, and 6381 User’s Guide 4.5.2 Changing the Modem’s IP address To can change the modem’s IP address: 1. From the Home screen, click
Hotwire 6210, 6211, and 6381 User’s Guide The Apply button will temporarily save this setting. To make the change permanent, click on Tools (at the to
Hotwire 6210, 6211, and 6381 User’s Guide 4.6.2 Port Forwarding Using the Port Forwarding page you can provide local services (such as web hosting) f
Hotwire 6210, 6211, and 6381 User’s Guide 2. Under Advanced, select Access Control. The Access Control screen appears. All Access Control rules have
Hotwire 6210, 6211, and 6381 User’s Guide Figure 4-15. Bridge Filters Note: The bridge filter table contains three hidden rules. These rules are ente
Hotwire 6210, 6211, and 6381 User’s Guide Figure 4-16. Multicast The Apply button will temporarily save these settings. To make the change permanent
Hotwire 6210, 6211, and 6381 User’s Guide 4.6.7 Static Routing If the modem is connected to more than one network, you may need to set up a static ro
Hotwire 6210, 6211, and 6381 User’s Guide 4.6.8 Dynamic Routing Dynamic Routing allows the CPE to automatically adjust to physical changes in the net
Hotwire 6210, 6211, and 6381 User’s Guide FCC Part 15 Declaration An FCC Declaration of Conformity may be downloaded from the Paradyne World Wide Web
Hotwire 6210, 6211, and 6381 User’s Guide 4.7.1 System Commands To make changes permanent, click on Tools (at the top of the page) and select System
Hotwire 6210, 6211, and 6381 User’s Guide 4.7.4 Update Gateway You can remotely upgrade the modem’s firmware from the web interface. The firmware con
Hotwire 6210, 6211, and 6381 User’s Guide Figure 4-21. Ping Test 4.7.6 Modem Test The Modem Test is used to check whether your Modem is properly co
Hotwire 6210, 6211, and 6381 User’s Guide 4.8.5 Product Information You can display the modem’s driver and run-time information. To view product inf
Hotwire 6210, 6211, and 6381 User’s Guide 5 Troubleshooting Below is a list of commonly asked questions. Before calling technical support, please loo
Hotwire 6210, 6211, and 6381 User’s Guide 5.5 The DSL Link LED is always off 1. Make sure you have DSL service. You should receive notification from
Hotwire 6210, 6211, and 6381 User’s Guide 6 Terminology What is a firewall? A firewall is protection between the Internet and your local network. It
Hotwire 6210, 6211, and 6381 User’s Guide The user may make no repairs to the equipment. Connection to party line service is subject to state tariffs.
Hotwire 6210, 6211, and 6381 User’s Guide Notice to Users of the Canadian Telephone Network NOTICE: This equipment meets the applicable Industry Canad
Hotwire 6210, 6211, and 6381 User’s Guide Table of Contents 1 Introduction ... 8 1.1 Models ...
Hotwire 6210, 6211, and 6381 User’s Guide 1 Introduction Congratulations on becoming the owner of a Paradyne modem. 1.1 Models This manual descri
Hotwire 6210, 6211, and 6381 User’s Guide • Address filtering and DMZ hosting • Simple web based status page displays a snapshot of your system conf
Comments to this Manuals