Zhone 3821Plus User's Guide download pdf (Page 93)

AT Commands and S-Registers

4-173821-A2-GB20-40 January 1999

Table 4-2

(2 of 10)

3821

Plus

S-Registers

S4 – Line Feed Character

Determines ASCII value used as the line feed character.

Enter a value from 0–127 for the line feed character.

Factory setting is 10 (ASCII line feed).

S5 – Backspace Character

Determines ASCII value used as the backspace (Backspace key). This character moves the cursor to the left and erases

the previous character.

Enter a value from 0–127.

Factory setting is 08 (ASCII backspace).

S6 – Blind Dial Pause

Determines how long (in seconds) the modem waits after going off-hook before dialing a telephone number if using result

code X0, X1, or X3.

Enter a value from 2–255 seconds.

The factory setting is 2 seconds.

NOTE: The default and permitted settings of this option are country-dependent. See Appendix H.

S7 – No Answer Timeout

Determines how long (in seconds) an originating modem waits before abandoning a call when no answer tone is

received.

Enter a value from 1–255 seconds.

The factory setting is 45 seconds.

NOTE: The default and permitted settings of this option are country-dependent. See Appendix H.

S8 – ‘‘,” Pause Time for the Dial Modifier

Determines how long (in seconds) the modem pauses when it encounters a comma (,) in the Dial command string.

Enter a value from 0–255 seconds.

The factory setting is 2 seconds.

NOTE: The default and permitted settings of this option are country-dependent. See Appendix H.

S10 – No Carrier Disconnect

Determines how long (in tenths of seconds) the modem allows the carrier signal to be Off before disconnecting the call.

Enter a value from 0–254 in 0.1 second increments. A value of 255 disables this register.

Factory setting is 20 (2 seconds).

NOTE: The default and permitted settings of this option are country-dependent. See Appendix H.

S12 – Escape Guard Time

Sets the value (in 20-millisecond increments) for the required pause before and after the escape sequence is issued. The

guard time prevents the modem from interpreting data as the escape sequence characters.

Enter a value from 0–255 in 20-millisecond increments. For example, the factory setting of 50 equals 1000 milliseconds or

one second. Factory setting is 50 (1 second).

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 174 175

Comments to this Manuals

No comments

Zhone 3821Plus User's Guide Page 93

Comments to this Manuals

Related products and manuals for Networking Zhone 3821Plus