Zhone 3821Plus User's Guide download pdf (Page 171)

Index

Index-33821-A2-GB20-40 January 1999

default configuration options, 2-5

setting with AT commands, 2-6

setting with DCP, 2-5

Dial, 3-9

Dial (ATD), 4-3

Dial Command modifiers

P (Pulse dial), 3-30

T (Tone dial), 3-30

dial command modifiers, 4-3

Dial Line Rate, 3-34

Dial Line Rate (S41), 4-19

Dial Stored Number (ATDS), 4-4

Dial Tone Detect, 3-30

dial tone detect (ATX), 4-6

dial tone wait, 4-3

Dialer Type, 3-30

dialing problems, C-3

disabled commands, 3-45

Disconnect, 3-9

Disconnect Delay

Receive Buffer, 4-18

Transmit Buffer, 4-21

disconnects, unsolicited, C-4

display

configuration options, 4-11

S-register, 4-5

Download Code, 3-48

download failure, 3-49, C-5

download latest firmware, 3-49, C-5

download-only mode, 4-7

DSR Control, 3-21

DSR Control (AT&S), 4-11

DTE connectors, 2-4

DTE Dialer Type, 3-25

DTE Interface, 3-18

DTE interface assembly, 2-3

DTE password, described, 7-2

DTE Rate, 3-19

in result codes, 4-6

problems, C-2

set to VF rate, 4-24

DTE Rate=VF Rate, 3-24

DTE status, 3-12

DTE-side password

backspace character, 7-10

number of tries, 7-9

termination character, 7-10

DTR

Alarm Reporting (S77), 3-46, 4-23

make busy via (S69), 4-22

DTR Action, 3-21

DTR Action (AT&D), 4-8

DTR Alarm Reporting, 3-46

DTR Continuous Repeat, 3-29, 4-18

E

echo command, 4-4

Edit Password Table, 7-4

Edit Strap Group, 3-15

EIA-232-E pin assignments, E-1

End (DCP option), 3-17

Enhanced Throughput Cellular (ETC), 3-35, 4-8, 4-9

Entry Wait Time, 7-9

equipment list, G-1

equipment required, 2-1

Erase All Passwords, 7-8

error codes (result codes), B-1

error control, 3-39

Error Control Fallback Character, 3-40

Error Control Fallback Character (AT%A), 4-12

Error Control Mode, 3-39

Error Control Mode (AT\N), 4-14

Error Control Negotiate Buffer, 3-40

Error Control Negotiate Buffer (AT\C), 4-13

error correction, extended result codes, 3-27

Escape Character, 3-25

Escape Guard Time, 3-26, 4-1, 4-17

escape sequence (+++), 4-1, 4-16

ETC (Enhanced Throughput Cellular), 4-8, 4-9, 4-25

Extended Result Codes, 3-27

extended result codes (ATX), 4-6

F

Factory configuration area, 3-15

factory default templates, 2-5

Fast Disconnect, 3-31, 4-24

fax

+FCLASS command, 4-13

operation, 5-1

problems and solutions, C-4

software settings, 5-1

standards, 5-1

types supported, 1-1

features, 1-1

firmware cloning, 4-7

firmware download, 3-49, C-5

firmware revision number, 4-4

firmware upgrade, 3-48, 3-49, C-5

flow control

AT\Q command, 4-15

DTE to modem, 4-15

modem to DTE, 4-15

modem to modem, 3-42, 4-13

of DTE, 3-41

of modem, 3-41

of modem and DTE, 3-41

problems, C-2

XON/XOFF, 3-41

Flow Control of DTE, 3-41

Flow Control of Modem, 3-41

frame size, 3-43

frame size (\A), 4-13

1 2 ... 166 167 168 169 170 171 172 173 174 175

Comments to this Manuals

No comments